Simple four steps, easy to start

1. 1. Connect the cable clamp to the power supply

   First, plug the battery clip into the emergency power supply Start the port (with a DO shape) to ensure sufficient power.

2. 2. Connect the positive and negative poles of the battery

   Connect the clip to the corresponding positive and negative poles of the car battery, with the red clip connected to the positive pole and the black clip connected to the negative pole.

3. 3. Get on the car and start a fire

   Get on the car and start it within 3 seconds, with a minimum interval of 30 seconds between the second start.

4. 4. Remove the wire clamp

   After starting the car, it is recommended to remove it within 30 seconds after getting off the car.

• When operating, stay away from the positive and negative poles of the battery to avoid short circuits caused by clamp contact.
• When the battery is severely depleted or damaged, the emergency starting power supply may not be effective. It is recommended to contact rescue.
• Do not start continuously for long periods of time to prevent damage to the battery and starting power supply.